Copper-based metal–organic framework decorated by CuO hair-like nanostructures: Electrocatalyst for oxygen evolution reaction

We report a Cu-based metal–organic framework (MOF) decorated by CuO nanostructures as an efficient catalyst for the oxygen evolution reaction (OER). MIL-53(Cu) was synthesized by a hydrothermal approach using 1,4-bezenedicarboxylic acid as organic precursor and further annealed at 300°C to form CuO nanostructures on its surface. The produced electrocatalyst, CuO@MIL-53(Cu), was characterized using various techniques. Under alkaline conditions, the developed electrocatalyst exhibited an overpotential of 801 and 336 mV versus RHE at 10 and 1 mA cm⁻², respectively. The reproducibility of the catalytic performance was validated using several electrodes. It was confirmed that the CuO hair-like nanostructures grown on MIL-53(Cu) using thermal treatment exhibit high OER activity, good kinetics and durability. CuO@MIL-53(Cu) is an economic noble-metal-free OER electrocatalyst. It has potential for application as anode material for sustainable energy technologies like batteries, fuel cells and water electrolysis.     

Synthesis and characterization of silica-coated Fe3O4 nanoparticle@silylpropyl triethylammonium polyoxometalate as an organic–inorganic hybrid heterogeneous catalyst for the one-pot synthesis of tetrahydrobenzimidazo[2,1-b]quinazolin-1(2H)-ones

In this study, silica-coated Fe₃O₄ nanoparticle@silylpropyl triethylammonium polyoxometalate catalyst was fabricated and characterized using atomic absorption, inductively coupled plasma optical emission spectrometry, elemental analysis, thermogravimetric analysis, Fourier-transform infrared, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and vibrating sample magnetometry analyses. The activity of this catalyst was examined in the synthesis of tetrahydrobenzimidazo[2,1-b]quinazolin-1(2H)-ones. The bonding of the polyoxometalate to the surface of the nanoparticles exhibited excellent catalytic activity in this synthesis. Besides, the catalyst showed good reusability and recovery from the reaction mixture. Tetrahydrobenzimidazo[2,1-b]quinazolin-1(2H)-ones were synthesized in high yields in the presence of inexpensive supported solid acid catalysts under classical heating conditions.     

1,10-Phenanthroline: A versatile ligand to promote copper-catalyzed cascade reactions

Ligand-promoted copper-catalyzed cascade reactions have become a robust tool for the synthesis of cyclic compounds. Although numerous ligands have been developed, this review focuses on the introduction of commercially available 1,10-phenanthroline-promoted copper-catalyzed cascade reactions in recent years. Moreover, based on original articles, this review highlights product yields in the presence and absence of the ligand, and the possible mechanistic role of the ‘copper/1,10-phenanthroline’ catalytic system.     

Sulfonic acid-functionalized Fe3O4-supported magnetized graphene oxide quantum dots: A novel organic-inorganic nanocomposite as an efficient and recyclable nanocatalyst for the synthesis of dihydropyrano[2,3-c]pyrazole and 4H-chromene derivatives

In this research, the main emphasis has been focused on the preparation of a novel Fe₃O₄-supported propane-1-sulfonic acid-grafted graphene oxide quantum dots (Fe₃O₄@GOQD-O-(propane-1-sulfonic acid)) that it was readily synthesized via a five-step procedure as a hitherto unreported magnetic nanocatalyst. This newly prepared Fe₃O₄@GOQD-O-(propane-1-sulfonic acid) nanocomposite was structurally well-established by different analytical techniques including Fourier transform infrared (FT-IR), X-ray diffraction (XRD), energy-dispersive X-ray (EDX), thermal gravimetric analysis (TGA), field emission gun-scanning electron microscope (FESEM), high-resolution transmission electron microscopy (HRTEM) and vibrating sample magnetometer (VSM) analyses. The high catalytic performance of this nanocomposite was exhibited in one-pot synthesis of dihydropyrano[2,3-c]pyrazole and 4H-chromene derivatives under mild conditions. Low reaction times, excellent yields of the products, benignity of the catalyst, easy reaction work-up and magnetic recyclability of the catalyst are the main advantages of the present protocol. Also, our research indicated that the Fe₃O₄@GOQD-O-(propane-1-sulfonic acid) could be reused up to five times without considerable loss of catalytic activity.     

Kinetic study of hydrogen sulfide decomposition on Pt(111) surface

In this work, kinetic of H₂S conversion to H₂ molecule on the surface of Pt(111) is studied using kinetic Monte Carlo simulation. The results of simulation were fitted to the experimental temperature-programed desorption spectra. The good agreement between the empirical and the simulated data confirms the proposed mechanism and kinetic data (activated energies and pre-exponential factors). The influence of variables such as temperature and concentrations of H₂S and H₂ on the overall results of hydrogen production is studied. The condition is proposed in which the best yield of reaction at minimum temperature is obtained. Results show that platinum is a perfect catalyst for converting H₂S to H₂ and it has a perfect performance (98%) after 5 μs at low temperature of 227°C.     

Kinetics studies of 5-methyl-2-hexanol, 2,2-dimethyl-3-hexanol,and 2,4,4-trimethyl-1-pentanol with chlorine atoms: Photooxidation mechanism of 2,4,4-trimethyl-1-pentanol

The rate constants for the reaction between chlorine atoms and either 5-methyl-2-hexanol, 2,2-dimethyl-3-hexanol, or 2,4,4-trimethyl-1-pentanol at 298 K were determined using the relative method with 2-butanol and 1-pentanol as reference compounds. The values obtained for 5-methyl-2-hexanol, 2,2-dimethyl-3-hexanol, and 2,4,4-trimethyl-1-pentanol (k × 10¹⁰ cm³ molec⁻¹ s⁻¹) were, respectively, (2.64 ± 0.5), (2.72 ± 0.5), and (2.50 ± 0.4), in agreement with the values of the rate constants reported in bibliography for similar alcohols and the values estimated by structure activity relationship methods. The photooxidation products of 2,4,4-trimethyl-1-pentanol initiated by chlorine atoms were identified (formaldehyde, 2-propanone, 2,2-dimethyl propanal, 4,4,-dimethyl-2-pentanone, and 3,3-dimethylbutanal), and the reaction mechanism was determined.     

Study of all stages of the Diels–Alder reaction of cyclopentadiene with 2,3-dicyano-1,4-benzoquinone and monoadducts: Kinetics,thermochemistry, and high pressure effect

The kinetic parameters and enthalpies of the Diels–Alder reactions between cyclopentadiene and 2,3-dicyano-1,4-benzoquinone leading to the formation of two different monoadducts and bisadduct were determined. The stability of adducts is compared. Monoadduct appears to be thermodynamically more stable than the bisadduct. Comparison with the other Diels–Alder reactions studied previously allows us to conclude that the heat effects upon formation of the considered Diels–Alder adducts are the lowest in comparison with all the studied dienophiles.     

Modeling of the elementary gas-phase reaction during chemical vapor deposition of silicon carbide from CH3SiCl3/H2

We established a gas-phase, elementary reaction model for chemical vapor deposition of silicon carbide from methyltrichlorosilane (MTS) and H₂, based on the model developed at Iowa State University (ISU). The ISU model did not reproduce our experimental results, decomposition behavior of MTS in the gas phase in an environment with H₂. Therefore, we made several modifications to the ISU model. Of the reactions included in existing models, 236 were lacking in the ISU model, and thus were added to the model. In addition, we modified the rate constants of the unimolecular reactions and the recombination reactions, which were treated as a high-pressure limit in the ISU model, into pressure-dependent rate expressions based on the previous reports (to yield the ISU+ model), for example, H₂(+M) → H + H(+M), but decomposition behavior remained poorly reproducible. To incorporate the pressure dependencies of unimolecular decomposition rate constants, and to increase the accuracies of these constants, we recalculated the rate constants of five unimolecular decomposition reactions of MTS using the Rice-Ramsperger-Kassel-Marcus method at the CBS-QB3 level. These chemistries were added to the ISU+ model to yield the UT2014 model. The UT2014 model reproduced overall MTS decomposition. From the results of our model, we confirmed that MTS mainly decomposes into CH₃ and SiCl₃ at the temperature around 1000°C as reported in the several studies.     

Kinetics of hydrogen peroxide decomposition catalyzed by Cu-buserite over a well-sealed and thermostated kinetics assembly

Herein a well-sealed and thermostated kinetics assembly is designed and built, which can run stirred at different reaction temperatures. With the reaction assembly above and the volumetric method together, the hydrogen peroxide (H₂O₂) decomposition reaction kinetics is systematically investigated under a variety of reaction conditions over a copper-doped buserite-type layer manganese oxide (referred to as Cu-buserite) as a heterogeneous catalyst. The overall second-order rate law is fitted out by the linear regression analysis, with the reaction orders with respect to both H₂O₂ and Cu-buserite determined to each be equal to 1, and then explicitly explained by the proposed Michaelis-Menten like mechanism. The apparent activation energy E_a is estimated as 33.5 ± 2.5 kJ mol⁻¹.     

Synthesis of Heat-resistant Polymers by Thiol–Ene Reaction of N-Allylmaleimide Copolymers Using Glycoluril Crosslinkers with Rigid Molecular Structures

We carried out the thermal curing of the copolymers of N-allylmaleimide (AMI) and 2-ethylhexyl acrylate (2EHA) using 1,3,4,6-tetra(2-mercaproethyl)glycoluril ( G1 ), 1,3,4,6-tetra(3-mercaptopropyl)glycoluril ( G2 ), 1,3,4,6-tetraallylglycoluril ( G3 ), triallylisocyanurate (TAIC), and pentaerythritol tetrakis(3-mercaptobutyrate) (PEMB) as the crosslinkers. Based on the results for the analysis of thiol–ene reactions monitored by IR spectroscopy, it was confirmed that the curing rate significantly depended on the combination of the used crosslinkers. The insoluble fraction after curing was more than 90% for the systems using the glycoluril crosslinkers, while the conversion of the allyl groups was suppressed due to the rigid structure of these crosslinkers. The heat resistance and the mechanical properties of the crosslinked polymers were investigated by thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, and mechanical tensile tests. For the products cured using the glycoluril crosslinkers, the glass transition temperature (T_g) and the maximum temperature of thermal decomposition (T_max) were 54–59 °C and 395–409 °C, respectively, being higher than those for the cured product prepared with PEMB and TAIC as the conventional crosslinkers. The elasticity (75–139 MPa), the maximum strength (3.0–4.1 MPa), and the adhesion strength (6.7–10.7 MPa) for the polymers cured with the glycoluril crosslinkers, determined by the mechanical tensile and single lap-shear adhesion tests, were higher than those for cured materials produced with PEMB. Thus, the thermal and mechanical properties of the maleimide copolymers were efficiently enhanced by crosslinking using the rigid glycoluril compounds. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 923–931